We are known for our complete 5-Step Re-grout Process, and today I am going to explain to you five individual steps. But first we need some tools, chemicals, cleaning products and sealants to get started.
Our delivery list will be as follows:
* Manual shaver
* Grout Removal Tool
* Vac Shop
* Mold / bacteria treatment
* Tile Cleaner
* Brush
* Small fan
* Grout
* Small mixing bucket
* Bucket with water
* Grout float
* Margin spatula
* Grout Amplifier
* Sponge
* Tiled stacker
* Spear ring
* Silicone
* Old towel
I know, I know, it looks like a lot of supplies, right? Well, it looks like if you are not in the tile business, but many homeowners already have a lot of things that just lie somewhere around the house or garage.
Now that we have our supplies, we are ready to begin work with a 5-step re-trowel process. Wait ... double check your list, because once you get down to work, it's hard for you to pause until you get the right materials to complete the project.
OK ... First step , removing old mortar, caulk and / or silicone. Using your straight razor, clean all the old paste from the corners, around the bathtub, toilet and everything else in the area in which you will re-rub. Using a mortar remover, remove the old mortar from the mortar joints using a pulling motion.
On Step two re-grouting process that will process mold / bacteria. Spray mold / bacteria treatment on all in which you will be overwritten. Let it sit for about 15-20 minutes before moving on to the next step.
Step Three the process of re-troweling tile washing. Spray the cleaner on the tile, and then let it sit another 15-20 minutes. Scrub everything down with a cleaning brush and warm water washing the cleaner.
During Step Four the process of re-grouting we apply a new solution. Mix the solution with luke warm water and the addition of a solution booster. After your solution is constant, start applying the solution using the solution float diagonally across the tile. After you finish rubbing the area, wash the mortar connections using a sponge and cool water.
Now you are ready for Fifth step to complete the 5-step re-grouting process. Seal all areas in which you re-erase. Using a sponge, apply sealant to all areas in which you re-rub. Let the sealant dry for about 2-4 hours before polishing the tile with a dry towel.
