Noting the total surface area of 17% of all brickwork, building mixtures play a fundamental role, emphasizing the appearance of the masonry. The color, shape and shape of the joints in brick blocks are very important factors in creating the final look. Due to the strong influence of building mixes, many profiles have been developed and designed. In some walls, the solution is kept in the recess, while in others it stands. It can also be designed in such a way that the bricks and joints are flush, forming a uniform smooth surface. The most common styles used by the Pointing services are flush, bucket handles stuck in weather conditions, recessed or slats and seams. The formation of the specified type of connection can be performed at the time of laying bricks. Joints can be left intact to form by indicating later when the masonry has hardened. Excess solution is removed with a spatula. To do this, the spatula is held at an angle under the extra grout and trimmed. Spatula should not scrape brickwork. After that, the construction seams get the proper shape.
Flash connection: This type of connection is completely fused with brick. The bricks and mortar are held at the same level without recession or ridges. This does not require any painting or additional work, but requires only trimming additional solutions. After the bricks are placed, the mortar is wiped with a cloth or tool. This style does not demonstrate great resistance to water penetration, since the surface is not compacted or tamed. Repointing is used for bricks that have lost sharp edges and are not suitable for any other types of joinery.
Recessed joint: In the recessed joint, the mortar is scraped off, and the edges of the bricks protrude. The depth of the mortar determines the thin edges of the bricks and defects of a unique appearance. For a visually attractive brickwork, a depth of 5 mm is considered the best choice, but there are stone works in which the mortar is more recessed. Since this type of joinery impedes the flow of water through the bricks, the laying becomes wet, and there are more opportunities for water penetration or seepage. It is advisable to condense the solution to increase its water penetration, but the surface may remain rough. The tools that are used in this type of joinery are wheel joints, square edge joints and slippers. This style is famous for its Georgian and Victorian brickwork, but it is not recommended in areas with heavy rain.
Weather struck: This style has the most promising ascetic results, and the facade looks neat, properly done. The play of lights and shadows emphasizes the appearance of the brickwork. The edge of the insert is at a depth of about 2 mm than the brick, and the leading edge is at the level of the brick. Effective use of a trowel is the key to getting the right results. The edges of the bricks should be well formed, and repairs should be carried out with the help of repair work on the brick. Since this art requires a lot of time and patience, it is more expensive and less common. The direction of the joint style is maintained in the same way to ensure a well-organized appearance. The thickness and pressing of the trowel blade are very important factors, which is why only experienced masons can do this. The slope of the solution should be smooth and well shaped. In addition to its strong visual appeal, it is also resistant to severe weather conditions.
Handle for bucket handle: This joint style is also called a concave joint, and the mortar is recessed into a round brick. A semicircular connector is used, which is pushed along the edges of the solution. In addition, you can use pipes or special metal tools. Cleaning dirt on a regular basis, which accumulates inside the joint, will require cleaning the bricks. The tool must be the same with the help of masonry to achieve a uniform look. The solution should be compacted, but it should be a little rough to give a more attractive look.
