As a car owner, you certainly want your car to look new every day. Even tiny scratches can be a thorn. Repainting work may be too expensive, so it is practical to simply repaint. Here are some tips you can follow from professional artists to make your car look new again:
• Clean areas with abrasions with wallpaper. Use a 240-grained variety for small cuts and 320-grams when you want to make a surface that is affected by the surface. Deeply split tags require 800 grams of wallpaper class.
• After sanding, make sure that you remove all dust, corrosion and sand residue.
• Wipe the paint primer evenly after cleaning the surface. Use a small brush or a match for tiny specks. Do not mix the primer with the original paint. The next step is to apply the first coat of your paint with care. Before the first coloring of the first layer to dry. Follow the same process for the final layer.
• Place a bet on the purchase of the appropriate color of your paint. Mix the paint in the bottle and check on the surface to see if the shade matches the original color. Most cars have a firewall where there is a tiny plate containing body codes and paint. Bottles of cosmetic paint come with brushes, so you don’t hate buying a separate applicator.
• When the paint is fully applied, you can put car wax to make your car more glossy again.
You can use hand paint for small areas. However, if you want to cut off large sections or the entire car body, it is recommended to use spray paint. This task is quite complex and should be performed in a closed, but fully ventilated area. If possible, the place should be completely free from dust, so your work with paint will not be spoiled.
It is also practical to hire a professional artist who can effectively do the work. This step will cost you less money, and the work can be completed faster than if an amateur repainted your car. You can contact local car suppliers and ask for referrals. Most of these dealers are aware of cheap artists who can do the job properly for a short duration.
If you need cheap, but decent work that will last a year or so, find out where local car dealers take used cars, which they get as trading tips to get pushed before resale. To save money, you can remove any rust, stain and paint and paint small areas yourself, and then do the rest of the work professionally.
Practice on a piece of scrap metal before you engage the car, and don't expect the results to look amazing. Follow these steps:
1. Make sure the area is not rusty.
If the damage is only a deep scratch or a tiny spot, you may need only a small part of the antistatic to stop the rust, so that it continues to form under the new paint.
2. Carefully place the stain.
Use a small piece of sandwich number 220 for surface roughness so that the primer adheres properly.
3. Thoroughly rinse the area.
Remove rust, dust, dirt, filler residue and wax; then let the area dry completely before applying the primer. The primer is used to seal a metal surface from rust and provide a surface for applying paint. The primer also fills tiny holes and defects on the surface.
If you are faced with a surface scratch or chip that does not reach the bare metal, you may be able to simply apply paint. But never apply paint on bare metal or plastic. If a bare spot is exposed or if the spot is larger than a fraction of an inch, first fill the area.
4. Use a tiny brush or a match to apply the primer sparingly.
You do not need more drops to cover the damaged area. Avoid getting primer on original paint. If you do, wipe it off immediately. Allow the primer to dry completely before proceeding to the next step.
5. Mix the paint in the dispensing bottle.
If your car is not very new, the color probably won't match exactly (which is another reason to keep the area as small as possible). Paint on new models does not fade as quickly as old paintings.
6. Apply paint, completely covering the surface of the stain and acting inward from the edges.
If you paint a scratch or a very small area, you can cut out a brush or use a match or a toothpick instead. The paint should be no thicker than the surrounding surface, or it will be displayed, run, bubble or peel off.
7. Wait a few days for everything to dry completely.
8. Wax and polish the entire car so that it blends in the painted area and makes everything shine.
